omily
Forum Replies Created
-
http://www.youtube.com/luxyhair is a great place to learn how to style and take care of extensions! 🙂
-
http://www.youtube.com/luxyhair is a great place to learn how to style and take care of extensions! 🙂
-
I've had both Hello Gorgeous and Luxy hair extensions and I HIGHLY recommend Luxy. They've stayed amazing and I have ABUSED them.
luxyhairextensions.com
-
The resistance while turning could be a result of overtightening, but if you do decide to grease the top part, I used bearing grease from the Auto parts store (that’s what the tech at X-Pole suggested when I called about my noise) https://www.studioveena.com/img/smilies/icon_e_smile.gif
-
Mine used to make a HIDEOUS noise when turning. NOthing a little bearing grease can’t fix. I generously lubed the part that sets in the dome (both sides, but especially the portion that sets into the top setion of the pole) and VIOLA! No more hideous noise https://www.studioveena.com/img/smilies/icon_e_smile.gif
-
I get weird aches in my fingers especially at night, and sometimes they can feel a little stiff. I used to get wrist aches but thankfull those have subsided https://www.studioveena.com/img/smilies/icon_e_biggrin.gif
-
I’ve found callus shavers (found with the pedicure supplies) to be amazingly effective on my hands. I’ve used it on my feet for years, and it’s wonderful! It sounds revolting and painful, but it’s not https://www.studioveena.com/img/smilies/icon_e_wink.gif
-
I seem to be having issues with feeling less grippy on the TG pole with the iTac2 also. https://www.studioveena.com/img/smilies/icon_eek.gif
-
Some sunscreens come in powder form!! https://www.studioveena.com/img/smilies/icon_e_biggrin.gif
They’re pricier than the stuff you can just slather on, tho
-
I tried the "love tap", but there’s still a gap. I even turned the B-tube upside down so that the worn finish was next to the extesion, rather than in the middle of the pole, but the gap remains the same. It’s just up where I can’t really see it now. I am beginning to wonder if that B tube isn’t flat on one end (the end where the finish is jacked up). The joint that is now in the middle is not completely flush either (is it supposed to be 100%, or am I just being anal?)
Thankyou sooo soo much for your help and suggestions, Empyrean! I really appreciate it!
-
Here’s a better pic of the gap and the worn finish. The gap seems more uniform all the way around now that I re-assembled -before it seemed to gap more on one side.
-
I tried again, and made sure to tighten each hex only a teeny bit, alternating back and forth. The gap remains https://www.studioveena.com/img/smilies/icon_e_confused.gif I’ll call the nice folks at X-Pole and see what they think. Thanks for your suggestions!!!
-
I did try taking it apart and starting again, but I’ll give it one more shot just to make sure. Thanks https://www.studioveena.com/img/smilies/icon_e_smile.gif
